CalcNest
⚠

important

This calculator provides estimates for planning purposes only. Always consult a licensed contractor or structural engineer for critical structural projects. Building codes vary by location — verify requirements with your local building department.

🏠 Roofing

Roof Shingle Calculator for Gable Roof

Replacing your roof is a big investment, and getting the right amount of shingles is important for staying on budget. Order too few and you'll have a delay mid-project — and possibly different dye lots that don't match. Order too many and you're wasting hundreds of dollars.

Our gable roof shingle calculator estimates exactly how many bundles of shingles you need, plus underlayment (felt paper), ice and water shield, nails, ridge shingles, and drip edge. Just enter your house dimensions and roof pitch.

Roofing is measured in squares — one roofing square equals 100 square feet of roof area. Standard 3-tab shingles come 3 bundles per square. Architectural (laminated) shingles are thicker and require 4 bundles per square. Always check the product label for exact coverage.

Safety note: Roof work is dangerous. If you're not comfortable working at height or with power tools, hire a professional roofing contractor. Always use fall protection (harness and anchor) when working on roofs with a pitch over 4/12.

ft
ft
/12

Most roofs are 4/12 to 12/12

ft
%

10-15% is standard

📐Formula Used

Roof Area = Footprint x Pitch Factor. Roof Squares = Area / 100. Bundles = Squares x Bundles/Sq x (1 + Waste%)

🛒Where to Buy Materials

Find roofing shingles, underlayment, and roofing tools for your project.

* As an Amazon Associate, we earn from qualifying purchases. Prices and availability are subject to change.

Frequently Asked Questions

Standard 3-tab shingles require 3 bundles per 100 sq ft (one roofing square). Architectural or laminated shingles are thicker and typically require 4 bundles per square. Always check the manufacturer's label — some premium shingles may require more.

title

Disclaimer: This calculator provides estimates for planning purposes only. Always consult a licensed contractor or structural engineer for critical structural projects.