Crushed Stone Calculator for Driveway
A gravel driveway is an affordable, attractive alternative to asphalt or concrete. But building a long-lasting gravel driveway requires proper depth and compaction — cut corners and you'll end up with ruts, potholes, and a muddy mess.
Our crushed stone driveway calculator tells you exactly how much gravel to order. Enter your driveway dimensions and desired depth, and we'll calculate cubic yards, tons, and even the number of truck loads you'll need. We also break down the material per layer if you're building with multiple sizes of stone.
A well-built gravel driveway has multiple layers: a bottom layer of large stone (3-4" crusher run), a middle layer of 2-3" stone, and a top layer of smaller gravel (3/4" minus or pea gravel). Each layer should be 2-3 inches compacted, for a total of 6-12 inches depending on your soil and expected traffic.
Compaction is everything when it comes to gravel driveways. Each layer needs to be thoroughly compacted with a plate compactor before adding the next layer. Crushed stone typically compacts by 20-30%, meaning you need to order 20-30% more than the final volume. Our calculator accounts for this.
10ft standard single; 20ft double
6-8" for cars, 10-12" for trucks/RVs
20-30% is typical
📐Formula Used
Tons = (Length x Width x Depth/12) / 27 x Density x (1 + Compaction%) x (1 + Waste%)
🛒Where to Buy Materials
Find driveway gravel, landscape fabric, and edging supplies.
Gravel & Stone on Amazon
Bagged options available
Gravel at Home Depot
Bulk and bagged
Driveway Supplies at Lowe's
Gravel, edging, fabric
* As an Amazon Associate, we earn from qualifying purchases. Prices and availability are subject to change.
Frequently Asked Questions
For a standard passenger car driveway, 6-8 inches of compacted gravel is usually sufficient. For heavy trucks or RVs, go with 10-12 inches total depth, built in multiple layers with the largest stone on bottom. Always start with well-compacted native soil.
Disclaimer: This calculator provides estimates for planning purposes only. Always consult a licensed contractor or structural engineer for critical structural projects.