πŸͺ¨ Paving & Stone

Gravel Calculator for Patio Base

Building a gravel patio, walkway, or paver base? Getting the right amount of gravel is essential for a stable, long-lasting foundation. Too little gravel and your patio will sink and shift over time. Too much and you're wasting money on material you don't need.

Our gravel calculator for patio bases helps you estimate exactly how much gravel to order. Enter your patio dimensions and desired depth, and we'll calculate the volume in both cubic yards and tons. We even account for compaction β€” gravel typically compacts by 20-30%, so you need to order more than the raw volume suggests.

For most patio bases, a 4-6 inch base of crushed stone (also called road base or crusher run) is recommended. This provides excellent drainage and compacts to a very hard surface. On top of that, add 1 inch of sand for setting pavers or stones.

Gravel is sold by both the cubic yard and the ton, and the conversion depends on the type of stone. Crushed limestone is heavier than pea gravel, for example. Our calculator lets you choose your gravel type so the tonnage estimate is as accurate as possible.

ft
ft
in

4-6" is typical for patio bases

%

20% is standard for compacted bases

%

πŸ“Formula Used

Cubic Yards = (Length x Width x Depth/12) / 27 x Compaction Factor

πŸ›’Where to Buy Materials

Find gravel, landscape fabric, and patio building supplies at these retailers.

* As an Amazon Associate, we earn from qualifying purchases. Prices and availability are subject to change.

Frequently Asked Questions

For a patio base, use crushed stone (also called road base or crusher run) in 3/4" to 1" size. The angular shape of crushed stone interlocks when compacted, creating a very stable base. Round gravel like pea gravel does not compact well and should only be used as a top dressing.

title

Disclaimer: This calculator provides estimates for planning purposes only. Always consult a licensed contractor or structural engineer for critical structural projects.